BLJZW - Q3-7057 AUTOMOTIVE SEALANT
- MSDS: BLJZW
- Manufacturer: DOW CORNING CORP
- Product Name: Q3-7057 AUTOMOTIVE SEALANT
- National Stock Number: 8030-01-338-7640
Product Identification
Product ID:Q3-7057 AUTOMOTIVE SEALANT
MSDS Date:11/16/1990
FSC:8030
NIIN:01-338-7640
MSDS Number: BLJZW
Responsible Party
MIDLAND, MI 48640
US
Emergency Phone: 517-496-5900
Info Phone: 517-496-6000
Preparer: JACK L. SHENEBERGER
Cage: 5D028
Contractor
Telephone: 517-496-4388
Cage: 71984
Ingredients
METHYLTRIACETOXYSILANE
CAS: 4253-34-3
RTECS: VV4500000
Fraction By Weight: 2%
OSHA PEL 10 PPM
ACGIH TLV: 10 PPM
ETHYLTRIACETOXYSILANE
CAS: 17689-77-9
Fraction By Weight: 3%
SILICA GEL
CAS: 112945-52-5
RTECS: VV7310000
Fraction By Weight: 14%
OSHA PEL 6 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST
CARBON BLACK
CAS: 1333-86-4
RTECS: FF5800000
Fraction By Weight: 1 - 5%
OSHA PEL 3.5 MG/M3
ACGIH TLV: 3.5 MG/M3; 9192
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: MAY IRRITATE SERIOUSLY WITH
MODERATE CORNEAL INJURY. SKIN: PROLONGED AND REPEATED CONTACT MAY
CAUSE MODERATE IRRITATION AND POSSIBLE A MILD BURN. INHALATION:
VERY SLIGHT IRRITATION OR PAIN TO THE EYES OR RESPIRATORY
PASSAGES. INGESTION: SHOULD NOT CAUSE INJURY DURING NORMAL
OPERATIONS.
Effects of Overexposure:EYES: CONSIDERABLE REDNESS LASTING A WEEK OR
MORE. SKIN: MAY CAUSE SLIGHT REDDENING.
Medical Cond Aggravated by Exposure:THIS PRODUCT MAY ENHANCE ALLERGIC
CONDITIONS ON CERTAIN PEOPLE.
First Aid
First Aid:EYES: FLUSH WITH WATER FOR 15 MIN. GET MEDICAL ATTENTION.
SKIN: GET MEDICAL ATTENTION IF IRRITATION DEVELOPS. INHALATION:
REMOVE TO FRESH AIR. INGESTION: NO FIRST AID SHOULD BE NEEDED.
Fire Fighting
Flash Point Method:COC
Flash Point:>250F,>121C
Extinguishing Media:WATER FOG, CARBON DIOXIDE, DRY CHEMICAL, FOAM.
Fire Fighting Procedures:SELF-CONTAINED BREATHING APPARATUS AND
PROTECTIVE CLOTHING SHOULD BE WORN IN FIGHTING FIRES INVOLVING
CHEMICALS.
Unusual Fire/Explosion Hazard:NONE KNOWN
Accidental Release
Spill Release Procedures:REMOVE PRODUCT AND USE ABSORBENT MATERIAL TO
TAKE CARE OF ANY OIL-LIKE RESIDUES.
Neutralizing Agent:NONE
Handling
Handling and Storage Precautions:STORE BELOW 90F/32C. USE REASONABLE
CARE.
Other Precautions:PRODUCT FORMS ACETIC ACID WHEN WXPOSED TO WATER OR
HUMID AIR.
Exposure Controls
Respiratory Protection:IF LOCAL EXHAUST VENTILATION IS INADEQUATE, USE
RESPIRATORY PROTECTION. SUITABLE RESPIRATOR- ORGANIC VAPOR TYPE.
Ventilation:LOCAL EXHAUST MAY BE NEEDED. MECHANICAL (GENERAL)
VENTILATION IS RECOMMENDED.
Protective Gloves:RUBBER OR PLASTIC GLOVES
Eye Protection:USE PROPER PROTECTION.
Other Protective Equipment:NONE
Work Hygienic Practices:WASHING AT MEALTIME AND END OF SHIFT IS
ADEQUATE. REMOVE CONTAMINATED CLOTHING.
Supplemental Safety and Health
NONE
Chemical Properties
HCC:V7
Boiling Pt:B.P. Text:>300F,>149C
Vapor Pres:<5 MM HG
Vapor Density:>1
Spec Gravity:1.07
Evaporation Rate & Reference:<1 (ETHER=1)
Solubility in Water:<0.1%
Appearance and Odor:ACETIC ACID-LIKE ODOR, PASTE, BLACK COLOR.
Stability
Stability Indicator/Materials to Avoid:YES
OXIDIZING MATERIALS.
Stability Condition to Avoid:HIGH TEMPERATURES.
Hazardous Decomposition Products:SILICON DIOXIDE, CARBON DIOXIDE, AND
TRACES OF INCOMPLETELY BURNED CARBON PRODUCTS.
Disposal
Waste Disposal Methods:REVIEW ALL LOCAL, STATE, AND FEDERAL REGULATIONS
CONCERNING HEALTH AND POLLUTION.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.